Dumb-bell steel fiber

 This product is superior to other types in terms of any performance index with high cohesion, uplifting resistance, and exceptionally good toughness. Tests show that the load curve declines rather slowly and even with secondary improvement effect. This is the only type of the shearing steel fiber that can satisfy the toughness of concrete.

    The steel fiber is sheared out of the cold-rolled thin steel plate or stainless steel plate at 0.4-0.8mm in thickness, which, prior to the shearing, is cut by a small cross shearer into steel roll. The breadth of the roll is just the length of the steel fiber. The tensile strength of the sheared-type steel fiber is 600-900MPa.

The steel fiber is sheared out of the cold-rolled thin steel plate or stainless steel plate at 0.4-0.8mm in thickness, which, prior to the shearing, is cut by a small cross shearer into steel roll. The breadth of the roll is just the length of the steel fiber. The tensile strength of the sheared-type steel fiber is 800-900MPa.

• Copper coated steel fiber

• Waved steel fiber

• Waved steel fiber

• Hooked steel fiber

• End hook steel fiber

• Corrugated steel fiber

• Corrugated steel fiber

• Flat head steel fiber

• Flat head steel fiber

• Xorex steel fiber

• Xorex steel fiber

• Mill cut waved steel

• mill-cut waved steel fiber

• Dumb-bell steel fiber

• Dumb-bell steel fiber

• Cohesive end hook steel fiber

• Cohesive end hook steel fiber